Original Research Open Access Logo

Arsenic removal from water by ?-FeOOH, ?-FeOOH nanoparticles

Trung Dinh Nguyen 1, *
  1. Da Lat University
Correspondence to: Trung Dinh Nguyen, Da Lat University. Email: pvphuc@vnuhcm.edu.vn.
Volume & Issue: Vol. 2 No. 2 (2018) | Page No.: 110-117 | DOI: 10.32508/stdjns.v2i2.743
Published: 2019-05-18

Online metrics


Statistics from the website

  • Abstract Views: 0
  • Galley Views: 0

Statistics from Dimensions

This article is published with open access by Viet Nam National University Ho Chi Minh City, Viet Nam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.

Abstract

-FeOOH and ?-FeOOH nanoparticle adsorbents for As(V) and As(III) removal were evident from the XRD diagrams, where the oxides appeared in the form ?-FeOOH and ?-FeOOH. The SEM image of the prepared samples revealed that the nanoparticles diameter was about 30 nm. The maximum adsorption capacities of ?-FeOOH for As(V) and As(III) were 77.28 and 78.65 mg/g; and ?-FeOOH were 63.75 and 88.99 mg/g, respectively. After 15 min, about 97–98% of initial As (III) and As(V) concentration (0.05mg/L) was removed from the solution using 1000 mg/L adsorbent. ?-FeOOH and ?-FeOOH nano particles became a promising adsorbent for the removal of As(V) and As(III) from groundwater.

Comments