Original Research Open Access Logo

Design and evaluation of neutron howitzer design for the research and education using MCNP5 program

Minh Van Truong 1, *
Anh Ngoc Nguyen 2
Thang Huu Ho 2
Hai Xuan Nguyen 2
Hung Tien Dinh 3
  1. Dong Nai University
  2. Dalat Nuclear Research Institute
  3. Military Institute of Chemical and Environmental Engineering
Correspondence to: Minh Van Truong, Dong Nai University. Email: Nghiado@sci.edu.vn.
Volume & Issue: Vol. 1 No. T2 (2017) | Page No.: 83-89 | DOI: 10.32508/stdjns.v1iT2.447
Published: 2017-06-30

Online metrics


Statistics from the website

  • Abstract Views: 0
  • Galley Views: 0

Statistics from Dimensions

This article is published with open access by Viet Nam National University Ho Chi Minh City, Viet Nam. This article is distributed under the terms of the Creative Commons Attribution License (CC-BY 4.0) which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.

Abstract

In this paper, the design evaluation of a neutron howitzer using for research and education purposes in Training Center at Dalat Nuclear Research Institute is presented. A mixture of paraffin and boron is used as both moderator and absorber in order to shield neutron from the 252Cf source. The howitzer cover which is made from steel shields the gamma-rays caused by the neutron capture reaction of boron. The simulation has been done using the MCNP5 program. The result shows that the design met requirements of usage and radiation safety rules in Vietnam.

Comments